Note: We will ship a free plug Adaptor ( not volt convert) for follow Countries:
AUSTRALIA, UNITED KINGDOM, IRELAND, NEW ZEALAND, AUSTRIA, BELGIUM , GERMANY, DENMARK, ESTONIA, SPAIN, FINLAND, FRANCE, GREECE, HUNGARY, The Netherlands, NORWAY, POLAND, PORTUGAL, SWEDEN, Czech Republic.

You are bidding on a BOYU submersible Air Pump with Red LED light

Features:

1.Novelty appearance,special design of jetting equipment, Soluble with high oxygen.
2.Low noise, generous air capacity,suitable for both marine and fresh water.
3.Internal 8 Red LED Light.
4.the motor is sealed in the body shell with excellent waterproof performance and high isolation intensity it is safe and reiable.
Technical Data:

1. Voltage: 220-240V
2. Frequence: 50Hz
3. Power: 15.6W
4. Wire Length:about 140cm=4.6ft=55in
5. Black Air Hose Length: approx. 100cm / 3.28 ft /39.27 in
6. Maximum liquid temperature 40 centigrades

Operation:
1.The electrical socket for this product should be installed higher than the highest level of the aquarium which will aviod water dripping into the socket.meanwhile, make sure that the voltage and frequency of the power supply is consisted with what on the marking plate.
2.The product should be installed vertically upward, the base down, lamp panels and spray up.
3.Before use the product ,the rubber suction cups should be mounted on the base , and then select the appropriate location at the bottom of the aquarium with gently press the pump, the pump will be firmly fixed.
4.Connected to the corresponding power, the submersible Air Pump runs; If the Submersible Air Pump don't run or do not jet oxygen normally, usually because the voltage is too low or too deep in water caused.(The Deepest depth<= 400mm)
5.Don't run the Air Pump dry .This will cause damage and effect the smooth running of the Pump.
6.If not in use the Pump should be taken out of water,dried and put in a cool and dry environment for future use.

Components Include:
1 x Submersible Air Pump
1 x User Guide

Show your friends: